Geeky query
May. 24th, 2003 12:15 pmThanks to
snow_leopard I have a shiny new AGP Graphics card. Unfortunately jellyfish (my computer) doesn't seem to like it. After slotting in the card into the AGP connector (that's the brown one near the processor, correct? - it the only one it'll fit in, anyway) and trying to power up, it does odd things. I've tried reinserting the card a few times, and it give a new error each time. The worst is when the power comes on but nothing else happens, no attempt to boot the bios or anything. Slightly better than that is when the bios beeps a few times (3 or 4), presumably to tell me it can't find my monitor, and then stops. Once I even got it to boot, although my monitor would only work attached to the old graphics card (which is a PCI device). Windows then claimed it located an unknown 'early PCI' device on my system, and asked for drivers, but refused to accept the graphic card drivers on the attached CD. I attempted to install the drivers by running the setup directly from the CD, but this claimed it couldn't find my new graphics card, and told me to up it in my computer, where it already was. Removing the new graphics card, my computer works perfectly every time.
Possible faults:
It's a dodgy connection - it appears to slot in properly, mind you.
The graphics card is faulty. But its brand new, dammit.
Theres a conflict with something else on my system?
My AGP connector is faulty. Possible - I've never used it before.
The BIOS/OS just can't recognize it?
Grrrr. I want my shiny new graphics card to work. Please? Help? *sweetsmile*
Possible faults:
It's a dodgy connection - it appears to slot in properly, mind you.
The graphics card is faulty. But its brand new, dammit.
Theres a conflict with something else on my system?
My AGP connector is faulty. Possible - I've never used it before.
The BIOS/OS just can't recognize it?
Grrrr. I want my shiny new graphics card to work. Please? Help? *sweetsmile*
no subject
Date: 2003-05-24 05:22 am (UTC)(no subject)
From:no subject
Date: 2003-05-24 05:47 am (UTC)Also, does it boot into Linux with both cards and what does lspci or less /proc/pci give for it (if anything).
(no subject)
From:(no subject)
From:(no subject)
From:no subject
Date: 2003-05-24 11:53 am (UTC)Lis
xx
(no subject)
From:no subject
Date: 2003-05-24 01:28 pm (UTC)Erm, I could make some probably-wrong suggestions:
Find the manual for your motherboard and work out what the sequence of beeps means - it's trying to tell you what's wrong, bless its heart!
There could be an IRQ (interrupt request) conflict with the new graphics card, although I'm sure it should be plug and play etc. Look in your BIOS and see if any IRQs have been reserved by naughty things (and so block plug and play). You could also try running your computer with the bare minimum plugged into it to see if that can get it to work (so take out sound card, network card, whatever else you have).
You can also check that your BIOS has been set so that it knows you have a plug and play operation system, and generally switch on plug and play.
You could also try setting your bios back to default settings to see if that helps. You could also see what bios version you have (look when it boos up) and have a look at the web site for your motherboard manufacturer and see whether they've made newer versions of your bios software which fix incompatibilities with AGP graphics cards. If so then you could try upgrading your bios (be very careful if you choose to do this).
Do you know what AGP slot speed multiplication your motherboard supports (e.g. 1x, 2x, 4x)? Do you know what multiplication the graphics card expects? I guess the card should be backwards compatible if the speeds don't match.
Or the AGP slot itself could be knackered, or the card itself. If you have another computer around the place then test the card in that, and try a known-good AGP grapics card in yours if you have one...
There are probably lots of other things that could be wrong. Hope this helps a bit. Good luck!
Nick
(no subject)
From:(no subject)
From:(no subject)
From:Re:
From:(no subject)
From:Re:
From:(no subject)
From: